|
HOME | CONTACT | VERSION FRANCAISE |
|
|
|||||||||||||
 |
|||||||||||||
|
|||||||||||||
 |
|||||||||||||
| In “scraping” mode, the scrapers are pulled towards the gutter by a 2 x 36 in (5 x 90 cm) or 2 1/2 x 36 in (6.25 x 90 cm) hydraulic cylinder.
A reversed system with the hydraulic cylinder pushing the scrapers is also available. |
|||||||||||||
 |
|||||||||||||
| Single gutter installation: 2 1/2 x 96 in (6.25 x 240 cm) hydraulic cylinder |
|||||||||||||
 |
|||||||||||||
| The track (rail) comes in 12 ft (3.6 m) sections and is bolted to the fl oor with anchors located 12 ft (3.6 m) from each other. This system simplifi es the installation without affecting the concrete fl oor. | |||||||||||||
 |
|||||||||||||
| Two hydraulic units with a 15 gallon (68 L) tank are available: a standard system with a 5 HP electric motor and a faster system with a 7.5 HP motor.
A single hydraulic unit is powerful enough to clean up to 4 gutters (with additional scrapers). |
|||||||||||||
 |
|||||||||||||
| The control panel has a 24 hour timer allowing to program many cleaning sessions and a stop position sensor. It also comes with a manual “On/Off” switch. The panel is pre-wired and ready to be connected.. | |||||||||||||
|
IDEAL INDUSTRIES INC. 784, Principale, Wickham (Québec) Canada J0C 1S0 Phone : 819 398-6822 Fax : 819 398-6810  Email : info@industriesideal.com Internet : www.industriesideal.com |